Airport DrainageRequest Quote Now

3000 Series trench drain at airport terminal

Airports require trench drains with secure lock downs because a loose bolt can be sucked into the plane's engine or propelled at high speeds by the engine blast.  Though trench drain systems at airport facilities cover a broad spectrum they all share the signature impact resistance and lock downs that mark airport trench drain applications.

Pro Tip:

  • Slotted drains are popular at airports because, without grates, they have the largest percentage of open area and pose no debris hazards on the tarmac.

airplanes in rowCounty airports

County airports support small single and twin prop aircrafts. Incorporate trench drain systems on taxiways and in front of the hangar doors.  Because loads are light (Class D), these drains tend to use ductile or cast iron grates without additional reinforcement.  County airports commonly use 4” wide pre-sloped drainage systems on taxiways and hangar bays since drainage areas are relatively small.

small jetMunicipal airports

Municipal airports are a little bigger.  The aircrafts using the runways may include some light commercial crafts. Hangar doors will still use 4” wide trench drain, but these require reinforcement.  Along the taxiways, 8” and 12” wide pre-sloped drains with Class D and E grating prevent standing water.

plane departingInternational airports

International airports deal with big equipment and acres of concrete surfaces that need to be drained quickly in the event of a storm.  Trench drain systems generally have Class E or F load ratings and grates with 2-point lock down systems.  Trench drains designed for large flow capacities use grates with a high percentage of open area along with wider trench dimensions; it is not uncommon to see 12 inch wide trenches that reach 3-to-4 feet deep.


Our Drainage Specialist's Recommendations

Michael's Recommendations for Airport Drainage Systems

Call Michael now 610-638-1221 ext 105

EconoDrain No. 4 Series
EconoDrain No. 4 (by MultiDrain)

The EconoDrain #4 Series incorporates a 4" wide polystyrene form with a 5.25" wide cast iron frame-and-grate, making a trench drain system easily adjusted on site for bottom, end and side more button

Zurn Z886
Z886 Perma-Trench (by Zurn)

Zurn Z886 Series' channel bodies come in two meter (80") lengths, which make long drain runs easier to install. With ductile iron grates and numerous accessories, the Z886 Series is adaptable to many design demands found in small more button

Polycast 700 Series
700 Series (by Hubbell)

The Polycast 700 Series is a durable drainage system with polymer concrete channel bodies and 4" channel interior. Polycast 700 Series is not prone to shifting after installation and offers a selection of accessories to make cleanouts more accessible.  The system’s frame and cast iron or ductile iron grate reinforce the system to Class D or E load rating. read more button

3000 Series by TDS

3000 Series by TDS dropTrench Drain Systems

The 3000 Series is a high volume drainage system with an integral steel frame that reinforces the system. Secured ductile iron grates upgrade the system to a Class F load rating. read more button

EconoDrain #12 PT-3
EconoDrain #12 PT-2 (by MultiDrain)

The EconoDrain #12 PT-2 Series former system features a 14” wide iron grate with bolt downs that prevent the grate from dislodging after installation.  This system also offers custom slope and depth, which increase its value as a high volume trench drain system. read more button

Neenah R-4990 Airport trench drain system
R-4990 Airport Series (by Neenah Foundry)

Neenah’s bolted R-4990 Airport system supports the heavy wheel loads of airport traffic.  The bolted frame-and-grate series comes preassembled in larger sizes for a streamlined installation without superfluous more button

Get a quote now for your Airport Drainage Project! Request Quote Now - drainage systems for the homeowner
3000 Series Trench Drain
Polycast Trench Drain
Zurn Z882 Trench Drain